-
KYN28-12 series Hv Switchgear
hv switchgear Overview This equipment is indoor metal armoring with drawable switchgear (hereafter refer to as switchgear.
3.6-12kilovolt three phase AC 50Hz single bus bar and the single bus bar subsection system's omplete electricity distribution equipment is used in the power plant, small... -
KYN28-24kV high voltage switchgear
KYN28-24kv high voltage switchgear
Overview KYN28-24(Z) series alternating-current metal-clad and metal-enclosed with drawable switchgear(hereinafter referred to as “switchgear” )
is a complete set of power distribution unit of three-phase single bus and single bus section system of 20kV and AC50(60)Hz. This switchgear is mainly... -
High Voltage Switchgear
KYN61-40.5(Z) type alternating-current metal-clad and metal-enclosed withdrawable switchgear is a indoor complete set of power distribution unit of three-phase AC50Hz and rated voltage of 40.5kV.
Standard:GB/ T11022-1999, GB3906-1991, DL404-1997,etc -
High Voltage Gas Insulated Switchgear
According to the type of switch, gas insulated switchgear is divided into load switch with grounded assembly (referred to as C module), load switch without grounded assembly (referred to as CB module), circuit breaker with grounded assembly (referred to as V module)...
-
Medium Voltage Switchgear
Medium voltage switchgear complete equipment is the voltage grade of 3~35kV electrical equipment, products in line with the national standard GB 3906-2006 "3.6kV~40.5kV AC metal closed switchgear and control equipment", mainly used for opening and closing stations, substations to accept and distribute electric energy.
-
metal clad switchgear HXGN
Armored shift type AC metal closed switchgear --metal clad switchgear
The item number:HXGN口-12 series conforms to GB/T11022-1999, GB3906-1991 and DL 404-1997 and other standards.
Is a three phase AC 50Hz, rated voltage 40.5KV indoor complete power distribution device. -
Metal Enclosed Switchgear
Metal ring switchgear is FLN□-12 type SF6 load switch as the main switch and the whole cabinet adopts air insulation, suitable for distribution automation, compact and extensible metal closed ring switchgear. It has the characteristics of simple structure, flexible operation, reliable chain and convenient installation. For a variety of different applications, different user requirements can provide the corresponding technical solutions.
-
Indoor Switchgear
Indoor AC metal armored mid-mounted switchgear. It is suitable for three-phase AC power system with rated voltage of 12kV and rated frequency of 50Hz. It is used to receive and distribute electric energy and control, protect and monitor the circuit.
-
GGD LV panel factory MOQ=0
GGD Overview The product has characteristics of high breaking capacity, fine dynamic and thermal stability, flexible electric project, convenient combination, better serial practicability, novel structure and high protection grade etc. It accords with the standards IEC439 "Low voltage...
-
MNS lv panel
MNS low voltage pull out switchgear (drawable switchgear--lv panel)
The device accords with international standard IEC439-1 and national standard GB7251.1. -
GCK lv panel
GCK low-voltage extraction switchgear is widely used in power plants, metallurgical steel rolling, petrochemical, light textile, port terminals, buildings, hotels and other places as AC three-phase four
For distribution and centralized control of electric motors in power supply systems with voltage 380V, 660V, frequency 50Hz and rated current 5000A or below. -
GCS low voltage panel mill
GCS type low-voltage extraction switchgear (low voltage switchgear), suitable for power plant, petroleum, chemical, metallurgy, textile, high-rise building and other industries of power distribution system.
The Device Accords With Standards IEC439-1 And GB7251.1 -
XL21 low voltage panel
XL-21 low-voltage power distribution cabinet is suitable for power distribution of three-phase four-wire or three-phase five-wire system with AC voltage of 500 volts or below in power plants and industrial and mining enterprises.
Type XL-21 low-voltage power distribution box is installed against the wall and repaired before the screen. -
PZ30 distribution box supplier
PZ30 series terminal combined type distribution box distribution box adopts the form of steel plastic structure, box base adopts steel structure and plated, end cover is made of flame retardant engineering plastic injection molding and equipped with transparent polycarbonate protective cover.
-
Solar PV inverter
-
ac vector inverter distributor
ELNS860S universal current vector inverter.
Widely used in CNC machining centers, lifting equipment,printing and packaging equipment,high-end applications and other industries.
wzebl@wzebl.com
+86 139 6879 9444
+86(0)577-27885177
+86(0)577-27885155
No.555 Chezhan Road, Liushi Town, Yueqing, Wenzhou, Zhejiang Province, China 325604
