• Single Phase Pad Mounted Transformer

• Primary Voltage Ratings: 34.5kV/19.92kV, 24.94kV/14.4kV, 13.8kV/7.957kV, 13.2kV/7.62kV, 12.47kV/7.2kV or others

• Secondary Voltage Ratings: 120/240V, 240/480V, 347V, 600V or others

• H.V. TAP RANGE: ±2×2.5% or others

• CONNECTION TYPE: Delta/Wye

• TYPE: Loop feed/Radial feed

• BIL: 30-150

• Standards: ANSI, IEEE, 

• Application: Residential Areas, Hotels, Single Family Houses, Parks, Underground Distribution Systems

• Power Rating: 15-250 kVA

The single-phase pad-mounted transformer rated capacity is 15-250 kVA. 

Single-phase Pad-mounted Transformer is generally used in places where single-phase power is required for civil use, 

such as household appliances, etc., and its capacity is relatively smaller than a three-phase pad-mounted transformer.

Single-phase Pad-mounted Transformer Specification

Product structure diagram

OPTIONAL ACCESSORIES

•  Multiple voltages or taps

• Externally operable multiple voltages or tap changer switches for

safe operation

•  Stainless steel tank, tank bottom, sill, door, and/or hardware

•  Service entrance in the sill

•  Various spades and terminals available for secondary bushings

•  Various other designations available, e.g., kVA, voltages, fuse number

•  High-voltage bushing inserts

•  Ground connectors

• One piece high-voltage bushings

•Envirotemp™ FR3™ fluid

• Load break switches

• Drain/sampling valve

• Pressure vacuum gauge

• Liquid level gauge

• Temperature gauge

• Canadian Standards Association (CSA) and Consumer Electronics Association (CEA) design stage bushing

DESIGN PERFORMANCE TEST

The design performance tests include the following:

• Temperature Rise: Our automated heat run facility ensures that any design changes meet ANSI® and IEEE® temperature rise criteria.

• Audible Sound Level: Ensures compliance with NEMA® requirements.

• Lightning Impulse: To assure superior dielectric performance, this test consists of one reduced wave, two chopped waves, and one full wave in sequence, precisely simulating the harshest conditions.

• The performance tests such as short-circuit capability tests, and lifting and moving devices tests can be executed while specified by the customer.